The Clipacore Clip Release Revolution

email: [email protected]

Welcome to CLIPACORE
The Clip Release Revolution

The Clipacore release system provides consistent results quickly! Compared to current core release techniques, our easy to use design necessitates the need for spanners or excessive force. We have taken away the frustration from components tightly locking up due to torque tension, leading to expensive damage to core pieces and power tools. For workflow efficiency, the Clipacore products range makes an essential addition to the professional tradesperson toolbox!
  1. 1/2” drill adaptor
  2. Quick release clip
  3. 1/2” core bit/extension thread
  4. Tapered guide pin / tapered drill aperture
  5. Drift key aperture
  6. Quick release clip apertures

The Clipacore system is compatible for 1/2” threaded core bits ranging from  38mm up to 152mm diameter

PLEASE READ - IMPORTANT DISCLAIMER
    1. Please pay close attention when using 38mm core bits as the clip could make contact with the wall during use, causing damage beyond repair.
    2. The Knockout tool has been designed for use on brickwork and solid blockwork only. Soft Mortar joints aligning central with the core bit may affect the knock out tool removing the unwanted waste material.
    3. Periodically apply plumbers silicone grease to circlip pin and the spigot end of the drill adaptor only. This will help protect the moving parts from dust and particles and extend the life of your purchased product.
    4. Due to the high RPM and vibration, the quick release clip has been designed to be a tight fit so as not to come off in use.Always attach the quick release clip to the core adaptors when the core adaptors are connected to a core bit and never straight out of the packaging.
    5. When using dust extraction units attached to a core drill, please be advised there is a loss of suction due to the pin inevitably covering the drill aperture.
    6. The adaptors are designed for dry core cutting only and not to be used in conjunction with water fed systems.
    7. The clips are designed to be removed and prised off by hand only (not by the use of tools). Using hammers or screwdrivers could break the clip.

 

We take no responsibility or liability for any damages or failure arising out of, or in connection with misuse of the product. Should damage occur to the diamond segments (separated from the barrel), please send photographic evidence of the core bit and the hole being drilled for examination by our technicians, to: [email protected]

Knock Out Tool

1. Impact Pin
2. Impact Pin Adaptor

Knock Out Tool

1. Impact Pin
2. Impact Pin Adaptor

NO MORE
SPANNERS

EASY CORE
WASTE REMOVAL

PREVENTS THREADS
LOCKING UP

IMPROVE WORK
FLOW EFFICIENCY

Our Stockists

Peter Booth

As used by PB plumber

  • QCSP - Quikcore Single Pack

  • £25.85/mo

        • 1 x core adaptor / 1 clip £9.95
        • 1 x drill adaptor £7.95
        • 1 x knockout tool £7.95

           

          plus shipping*

  • QCMP - QuikCore Multi Pack

  • £52.52/mo

        • 5 x core adaptors / 5 clips £49.75
        • 1 x drill adaptor £7.95
        • 1 x knockout tool £7.95


    (20% saving of £13.13) – £65.65 RRP plus shipping* 

If a Clipacore adaptor is needed for an extension also an additional drill adaptor and core adaptor can be purchased – £17.90.

 

*Delivery charge £8.39 signed for 1-2 days. – All deliveries are tracked and signed for.

What our clients say

  • Fantastic product for my entire team of installers to save time. Without any faffing about! An absolute must have tool.

    Jack Barnes - Barnes Warwick ltd

  • Finally, my core bits can last much longer without hitting them to pieces to remove unwanted pieces. Loving the quick release feature also!

    Kev Mitchell - Plumbing & Wet Rooms Specialist

View our Duocut Product!

CLIPACORE BENEFITS

• ClipaCore the industry-first Diamond Core clip release system, manufactured to the highest engineering standards in Great Britain.
• ClipaCore is 100% compatible with existing 1/2″ diamond tipped core sets and power tools, upgrading today’s tools into the 21st century.
• Clipacore a growing family, enabling installers to select across the range of products to suit their toolset and working needs.
• ClipaCore used by professional tradespeople protecting their tools, saving working time and offering personnel protection.
• ClipaCore offers the professional tradesperson the products they need whenever diamond core drilling