How to use:
- Remove the inner 2” plastic flue pipe from the 4” aluminium flue pipe
- Check the barrel guide fits inside the redundant flue pipe
- Mount a 117mm core bit or greater onto the long threaded stub (lubricating long thread with lubricant spray is recommended for first use)
- Drop compression spring onto remainder of threaded stub
- Mount the barrel guide Hand tight only until it reaches the compression spring
- Insert barrel guide into flue pipe
- Prior to drilling, check drill handle is correctly positioned and firmly tightened
- Adopt a comfortable and safe footing
- Commence drilling until outer core bit has scarred wall approx. 25mm deep
- Remove drill from flue pipe
- Remove the barrel guide and spring
- Continue drilling new hole until through
- Ensure the long threaded stub remains free from dirt and debris before each use and suitably store
1 – Drill /arbor adaptor
2 – Quick release clip
3 – Duocut adaptor
4 – 117mm core bit or greater (not supplied)
5 – Compression spring
6 – 94mm barrell guide
Benefits of Fluemate
- Safe to use when working at height
- Scars the wall symmetrical to that of the existing flue pipe and avoids skidding off course
- Can be used with a variety of commonly used core bits
- Spring loaded barrel for fast removal once wall is scarred
Benefits of Fluemate
- Safe to use when working at height
- Scars the wall symmetrical to existing flue pipe and avoids skidding off course
- Can be used with a variety of commonly used core bits
- Spring loaded barrel for fast removal once wall is scarred
Fluemate comes with a 1/2” drill/arbor adaptor, DuoCut adaptor with clip,compression spring, 94mm barrel guide.
1 – Drill /arbor adaptor
2 – Quick release clip
3 – Duocut adaptor
4 – 117mm core bit or greater (not supplied)
5 – Compression spring
6 – 94mm barrell guide